Config 1000-2044

Miscellaneous Configurations Numbers 1000-2044

1000	2000	2001	2002	2003	2004	2009	2010	2011	2012	2013
2014	2015	2016	2017	2023	2029-2036	2037-2040	2041	2042	2043-2044

1000 Save all invoices for EOM reprints? Y/N

"Y" A/R monthly invoices may be reprinted for ALL accounts, using the ARIP "Print Monthly Invoices" option.

"N" Only accounts with "Invoices Needed" selected in the "Statement Code" field in ARM will be printed.

2000 Hot list parameters (Ex. 01,10,15,20,25)

The first set of numbers means you need to have sold more than one of an item to be listed in the Hot List. (When a system is new, you may set these numbers to 00 for the first four months, which will turn off the system.)

The next four sets of numbers mean the number of items sold, times the stocking level for the number of days you have had the item in stock. These numbers correspond to 30,60,90 and 120 days.

Items that meet the above parameters will be listed on the IVHT ("Hot Selling New Items") report.

2001 Print discontinued items on invent reports? Y/N

(Discontinued items are items with min/max and on-hand and zero.)

"Y" Will print discontinued items on "IVP" reports.

"N" Items will not be printed.

2002 Print Inter-store transfers? Y/N

For Multi-Stores.

"Y" Will print the transfers.

"N" Will not print the transfers.

2003 (L)ifo (F)ifo (A)vg (C)omplete (E)stimate (W)eight

Used with the IVT ("Inventory Totals") program and the IVP ("Inventory Masterfile Print") program. (E)stimate runs fastest. Only use the others when necessary. For Example: End of year figures.

(L)ifo Figures cost of inventory from the invoice history in IVM; Last In, First Out.

(F)ifo) Figures cost of inventory from the invoice history in IVM; First In, First Out.

(A)verage Figures cost of inventory from the invoice history in IVM, averaging the invoices.

(C)omplete Figures the cost of inventory three ways (Lifo, Fifo, and Average) on IVT report. (Gives Average on IVP.)

(E)stimated Figures cost of inventory off of your discount and your retail, as listed in the IVM.

(W)eight Averages the cost of goods on all invoices received through IVPR ("Receive/Cancel Orders") since the item was put on inventory.

2004 Archive deleted spl orders & inv items? Y/N

"Y" Manually deleted items, and items deleted by history roll, will be retained for possible future re-entry, using the IVRC ("Inventory Archives") program.

"N" The deleted items will not be retained.

2009 IVM to update BSMGR database? Y/N

"Y" Will add items to BSMGR Database when you enter items not found in the database on IVM.

"N" Will NOT add items to BSMGR Database.

2010 Print (U)PC or (C)atalog on POs (in addition to the BSMGR Item number)

"U" Will print the UPC barcode on purchase orders.

"C" Will print the catalog number on purchase orders.

2011 Use SPCN # from BSMDATA? Y/N

This line is used for inputting product from the disk Parable supplies to stores that are Parable stores. If new items have to be entered on inventory, this determines how you want non-ISBN items to be entered. You can choose either SPCN or UPC format.

"Y" Means you want to use SPCN numbers.

"N" Means you want to use UPC numbers.

2012 Vendor 2 default for IVM

Enter the Vendor/Distributor default number for Vendor 2 field when new items are put on inventory or taken as special orders.

2013 Vendor 3 default for IVM

Enter the Vendor/Distributor default number for Vendor 3 field when new items are put on inventory or taken as special orders.

2014 Print labels default for IVM? Y/N/T

When an item is set up in IVM, the "Labels" field will default to the "Y," "N," or "T" that is entered here.

"Y" Will allow labels to be printed for the item.

"N" Will not allow labels to be printed for the item.

"T" Will allow a label to be printed without a barcode on dot matrix printers.

2015 Exchange Rate for Selling Price.

If you want items entered on masterfile to reflect a selling price ("Our Price #1") more/less than the U.S. retail price ("Sugg. Price"), enter a percentage amount in the "Exchange Rate for Selling Price" field. This is used for foreign countries.

Example:

To reflect a 10% lower price than U.S. retail, enter 0900 (90% of Sugg. Retail).

To reflect a 10% higher price than U.S. retail, enter 1100 (110% of Sugg. Retail).

Turn this feature off for figuring cost in IVM, IVUP and IVO, by entering "N" in the "Use for figuring Cost?" field.

2016 Default for tracking for IVM.

"Y" Defaults the "Track" field to "Y" when entering new items on masterfile in the IVM program.

"N" Defaults the tracking field to "N" when entering new items on masterfile in the IVM program.

2017 IVM to blank wholesale and discount labels? Y/N

"Y" Blanks out the labels of "Wholesale" and "Discount" on IVM screen. The discount percent and the wholesale dollar amount may still be shown.

"N" Does not blank out the labels of "Wholesale" and "Discount."

2023 Deduct defective merch from Inv on returns? Y/N

"Y" If quantity is to be deducted from the "On Hand" field when a Return is merged.

"N" If defective merchandise was not merged into inventory or has already been taken off.

2029 Min/Max Parameters #1.

2030 Min/Max Parameters #2.

2031 Min/Max Parameters #3.

2032 Min/Max Parameters #4.

2033 Min/Max Parameters #5.

2034 Min/Max Parameters #6.

2035 Min/Max Parameters #7.

2036 Min/Max Parameters #8.

2030 thru 2036 are used when the IVHR ("History Roll") "Monthly with Stock Changes" option is run. You may tie different sales departments to different "Turn Numbers" in the "Turn" field on the cash register setup.

A window comes up for each "Turn Number," as follows:

Enter the least amount that you should have sold for the last six months to stock the amount entered on the Maximum. Enter the minimum amount to have on hand before the item is pulled to a below minimum report to be ordered and bring the amount on hand to the maximum amount to keep in stock.

Example:

You would need to sell 1 or 2 in the last six months to keep a maximum amount of 1 in stock. (This would be a 2, 3, or 4 times turn per year.)

You would need to sell 3 in the last six months to keep a maximum amount of 2 in stock. (This would be a 6 times turn per year.)

You would need to sell 4, 5, or 6 in the last six months to keep a maximum amount of 3 in stock. (This would be a 8, 10, or 12 times turn per year.)

You would need to sell 16 or 17 or 18 in the last six months to keep a maximum amount of 7 in stock. (The items would not be pulled to an order until you have less than 4 on hand. This would be 32, 34, or 36 times turn per year.)

After you have been on BSMGR for six months, you may run an IVHR "Monthly with Stock Changes," which will check the sales against the parameters here. If the sales were less, the maximum amount to stock would be lowered. If no sales are made for the number of quarters set in configuration number 2042, the maximum amount to stock could be taken to zero. Then, if number 2041 is set to "Y," the items would be deleted from your inventory.

2037 Open to buy Jan-Mar

2038 Open to Buy Apr-Jun

2039 Open to buy Jul-Sep

2040 Open to buy Oct-Dec

The Open to Buy levels, 2037 thru 2040, may be set up for different quarters of the year.

Enter the wholesale dollar amounts that you want to budget for each Point of Sale department for the quarter chosen.

To decide on the budget amount for each department, obtain a copy of the G/L Income Statement OR run the SLT program. (Enter zeros for the month, enter the year you want to total, and enter 365 for the number of days.)

You can see from these reports the retail dollar amount sold in each department for the year. Decide if your projected sales for the next year will be more or less. Then take your projected sales by department and multiply by the cost of goods percent paid (discount received subtracted from 100%) to find the wholesale dollar amount. This should equal the wholesale dollar amount to budget for the department

You may use the arrow up and arrow down keys to go to a certain line to enter or change information

2041 IVHR delete discontinued out of stock items? Y/N

When the IVHR "Monthly with Stock Changes" option is run, the discontinued and out of stock items will be deleted if a "Y" is entered. They will not be deleted if "N" is entered.

Note: Multi-Stores should disregard this configuration. IVHR always interprets this as an "N," as far as history roll is concerned.

2042 Num sales qtrs before discontinuing 2/3/4.

Choose either 2, 3, or 4 quarters of "no sales" before the IVHR "Monthly with Stock Changes" lowers the maximum amount to stock to zero when the on-hand is zero.

2043 Model A Inventory Parameters.

2044 Model B inventory parameters.

Enter the percentage makeup of your inventory, in sales dollars, to be "A" items and the percentage to be "B" items, these being your primary selling stock items, as opposed to "C" items (the remainder of sold items) and "D" items (unsold items).

Example:

Inventory Sold
Unsold

A

B

C

D

10% 20% 30% 40% 50% 60% 70% 80%
90%

100%

0%

"Y"	A/R monthly invoices may be reprinted for ALL accounts, using the ARIP "Print Monthly Invoices" option.
"N"	Only accounts with "Invoices Needed" selected in the "Statement Code" field in ARM will be printed.

"Y"	Will print discontinued items on "IVP" reports.
"N"	Items will not be printed.

"Y"	Will print the transfers.
"N"	Will not print the transfers.

(L)ifo	Figures cost of inventory from the invoice history in IVM; Last In, First Out.
(F)ifo)	Figures cost of inventory from the invoice history in IVM; First In, First Out.
(A)verage	Figures cost of inventory from the invoice history in IVM, averaging the invoices.
(C)omplete	Figures the cost of inventory three ways (Lifo, Fifo, and Average) on IVT report. (Gives Average on IVP.)
(E)stimated	Figures cost of inventory off of your discount and your retail, as listed in the IVM.
(W)eight	Averages the cost of goods on all invoices received through IVPR ("Receive/Cancel Orders") since the item was put on inventory.

"Y"	Manually deleted items, and items deleted by history roll, will be retained for possible future re-entry, using the IVRC ("Inventory Archives") program.
"N"	The deleted items will not be retained.

"Y"	Will add items to BSMGR Database when you enter items not found in the database on IVM.
"N"	Will NOT add items to BSMGR Database.

"U"	Will print the UPC barcode on purchase orders.
"C"	Will print the catalog number on purchase orders.

"Y"	Means you want to use SPCN numbers.
"N"	Means you want to use UPC numbers.

"Y"	Will allow labels to be printed for the item.
"N"	Will not allow labels to be printed for the item.
"T"	Will allow a label to be printed without a barcode on dot matrix printers.

Example:	To reflect a 10% lower price than U.S. retail, enter 0900 (90% of Sugg. Retail).
	To reflect a 10% higher price than U.S. retail, enter 1100 (110% of Sugg. Retail).

"Y"	Defaults the "Track" field to "Y" when entering new items on masterfile in the IVM program.
"N"	Defaults the tracking field to "N" when entering new items on masterfile in the IVM program.

"Y"	Blanks out the labels of "Wholesale" and "Discount" on IVM screen. The discount percent and the wholesale dollar amount may still be shown.
"N"	Does not blank out the labels of "Wholesale" and "Discount."

"Y"	If quantity is to be deducted from the "On Hand" field when a Return is merged.
"N"	If defective merchandise was not merged into inventory or has already been taken off.

Example:	You would need to sell 1 or 2 in the last six months to keep a maximum amount of 1 in stock. (This would be a 2, 3, or 4 times turn per year.)
	You would need to sell 3 in the last six months to keep a maximum amount of 2 in stock. (This would be a 6 times turn per year.)
	You would need to sell 4, 5, or 6 in the last six months to keep a maximum amount of 3 in stock. (This would be a 8, 10, or 12 times turn per year.)
	You would need to sell 16 or 17 or 18 in the last six months to keep a maximum amount of 7 in stock. (The items would not be pulled to an order until you have less than 4 on hand. This would be 32, 34, or 36 times turn per year.)