To open SLTP, press <Alt M> ("Menu") and follow the Menu path illustrated below, then press <Enter>, or simply enter <SLTP> in the "Enter Program Name" field and press <Enter>.

Note:    The POS ("Point of Sale") program should not be open on any terminal when this program is started.

Note:    You may print this to a file.  Go to SYS, Config File, Change Misc. Configurations, number 4006, "Sltape export file name."

• Leaving blank will send the information to the printer.
• Enter <SLTAPE>, and the information will be sent to a file named SLTAPE.
• If you enter <NONE>, the information will not be printed or sent to a file.

This is a record of your sales, and we suggest you keep a copy in some form.

This program allows all transactions to be printed on 8 ½" X 11" paper.  You will have 1, 2, or 3 columns per page, depending on the number of cash registers you are currently using.  This information will be the same as the information on the sales tapes.

You may start the print routine of this program and then open the POS program, but do not start with POS open.

All transactions since the last time SLTP was run will be printed.

Example of printed transaction:

 

Each transaction will be listed as it was rung up.